Projects

Customer Issue: Attic renovations left the Envis’ attic with little intact insulation.
Our Solution: The customers opted for a fast solution, so the team stocked up on insulation foam and gave their attack the full treatment. After covering everything that could be sealed and fixing fiberglass panels to whatever couldn’t, our finishing touch was to go over it after drying for the last check.

Customer Issue: Found mice droppings.
Our Solution: We found signs of mice activity in the attic but no nests, so we placed a few humane traps and meticulously cleaned, decontaminated and disinfected the area. We then looked for possible entry points and sealed them to prevent future entry.

Customer Issue: Wanted to improve energy efficiency.
Our Solution: After a thorough examination of the attic and safely removing the existing insulation, we used industry standard equipment to apply spray foam to all available surfaces, sealing gaps to reduce air loss and improve energy conservation.

Customer Issue: Attic needed cleaning.
Our Solution: We first inspected the attic for any animal leftovers. Finding none, we examined the insulation and found that over the winter moisture had accumulated and there were damp spots. We safely cleaned the entire area and recommended that the customer consider removal and replacement of the old insulation material.

Customer Issue: Needed rodent proofing of his attic after noticing rodent droppings.
Our Solution: We thoroughly inspected the attic to identify all areas where rodents were entering. Then we repaired all sites, trapped and removed rodents that had been in the crawl space and attic.

Customer Issue: Needed attic insulation added to her new home.
Our Solution: Our team cleaned up all construction debris, sealed several air leaks, and added fresh new insulation to the entire attic. At the customer's request, we also added a radiant barrier for additional protection against the heat of the sun's rays.

Customer Issue: Needed new insulation to replace the insulation that had been burnt after a small fire.
Our Solution: After removing the burned and water-damaged insulation, our team swept and cleaned the entire area, and installed new insulation where needed in all the affected areas.